MT0950
Pitch
95 mm
95 mm
Inner height
54.5 mm
54.5 mm
Inner widths
77 – 600 mm
77 – 600 mm
Bending radii
140 – 380 mm
140 – 380 mm
All pictographs
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Order code
Important information
Pictographs
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Stay variants
MT0950 RMD
Cover with hinge in the outer radius “standard”
- Aluminum cover system with hinge for light and medium loads. Assembly without screws.
- Outside: swivable to both sides.
- Inside: release by turning 90°.
MT0950 RDD
Cover with hinge in the outer radius “standard”
- Plastic cover system with hinge for light and medium loads. Assembly without screws.
- Outside: swivable to both sides.
- Inside: release by turning by 90°.
Installation dimensions
Unsupported arrangement
KR [mm] |
H [mm] |
Hz [mm] |
LB [mm] |
UB [mm] |
|---|---|---|---|---|
140* | 360 | 405 | 630 | 275 |
170* | 420 | 465 | 725 | 305 |
200 | 480 | 525 | 819 | 335 |
260 | 600 | 645 | 1007 | 395 |
290 | 660 | 705 | 1102 | 425 |
320 | 720 | 765 | 1196 | 445 |
380 | 840 | 885 | 1384 | 515 |
* not RMD
Load diagram for unsupported length depending on the additional load.
Sagging of the cable carrier is technically permitted for extended travel lengths, depending on the specific application.
Intrinsic cable carrier weight qk = 7 kg/m. For other inner widths, the maximum additional load changes.
Speed
up to 10 m/s
up to 10 m/s
Acceleration
up to 25 m/s2
up to 25 m/s2
Travel length
up to 7.4 m
up to 7.4 m
Additional load
up to 35 kg/m
up to 35 kg/m
Gliding arrangement
GO module with chain links optimized for gliding
KR
[mm]
| H
[mm]
| nRKR | LB
[mm]
| UB
[mm]
|
|---|---|---|---|---|
| 170* | 240 | 4 | 1710 | 773 |
| 200 | 240 | 4 | 1995 | 888 |
| 260 | 240 | 4 | 2565 | 1114 |
| 290 | 240 | 4 | 2755 | 1183 |
| 320 | 240 | 4 | 3040 | 1296 |
| 380 | 240 | 4 | 3610 | 1523 |
Speed
up to 8 m/s
up to 8 m/s
Acceleration
up to 20 m/s2
up to 20 m/s2
Travel length
up to 230 m
up to 230 m
Additional load
up to 35 kg/m
up to 35 kg/m
The gliding cable carrier must be guided in a channel. More information
The GO module mounted on the driver is a defined sequence of 4 different KR/RKR link plates.
Glide shoes have to be used for gliding applications.
Downloads
Subject to change.
Follow Us On:
U.S. Tsubaki Automotive LLC
Conveyor Operations