EasyTrax® series
- Sturdy 2-component design: solid chain body, flexible film hinge
- Plastic chain links
- Extensive unsupported length
- Inside space is gentle on the cables – no interfering edges
- Very quiet through integrated noise damping
- Inside or outside openable
- Dividers for cable separation
- Single-part end connectors with integratable strain relief
Features
- Very fast cable laying by simply pressing in the cables
- Very high fill level through lateral swivelling of the lamella – lamellae do not swivel into the cable space
- Each chain link consists of two different materials:
– Hard chain body made of glass-fibre reinforced material
– Lamellae with flexible film hinge made of special elastic plastic - Sturdy cable carrier design
- High torsional rigidity
- Extensive unsupported length
- Very quiet through integrated noise damping
Pictographs
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Fast and easy installation of cables
Very high fill level
High side stability
Divider systems for reliable cable separation
Cable carrier design
Solid plastic cable carriers: chain links and end connectors made of plastic
Each chain link consists of two different materials:
- Hard cable carrier body made of glass fiber-reinforced material
- Flexible lamellae made of elastic plastic
The two-component technology
The two-component technology of the EasyTrax® combines two seemingly incompatible features: stability and flexibility.
Cable carriers need to be extremely sturdy, with extensive unsupported length. At the same time, cables need to be inserted easily for fast cable laying. The EasyTrax® meets these requirements thanks to its innovative design and material combination of a hard cable carrier body made from fiber glass reinforced material and lamellae made of elastic plastic.
Comparison of dimensions
| Manufacturer | hi [mm] | hG [mm] | t [mm] | Identical connection hole pattern |
|---|---|---|---|---|
| ET0320 | 18 | 25.5 | 32 | yes |
| Competitive product | 19 | 25 | 30.5 | yes |
Comparison of bending moment
Comparison of bending strength
Load diagram
for unsupported length depending on additional load
Advantages over competitive product
- 4 times bigger additional load compared to competitive product
- Double unsupported length compared to competitive product
- Faster cable laying at a higher utilization faktor
- Low noise operation due to internal damping system
- High side stability through locking in the stroke system
- Dividers can be used for cable separation
