Two parts
open
Properties
- Steel profiles, folded on one side.
- Zinc plated sheet steel or stainless steel.
- Available for all cable carrier types.
- Standard lengths 2000 / 3000 mm, special lengths in 1 mm sections.
- Variable widths.
Zinc plated sheet steel / stainless steel
Standard lengths 2000 / 3000 mm
Special lengths on request
Pictographs
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
×![]()
With upstream strain relief on the fixed point, the support trays have to be made accordingly longer.
The use of a two part support tray depends on the the cable carrier. Please contact us.
Calculating the support tray length
Support tray length LA: LA = LS/2 + UB + l1
(for standard connection)
Dimensions
Two parts – open
×![]()
×![]()
UNIFLEX Advanced series
| Bk [mm] | b1 [mm] | b4 [mm] | BA [mm] | hA [mm] | s [mm] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| UA1455 | ||||||||||||||
| Bi + 16 | Bk + 6 | 25 | Bk + 21 | 20 | 1.5 | |||||||||
| UA1555 | ||||||||||||||
| Bi + 18 | Bk + 6 | 30 | Bk + 21 | 20 | 1.5 | |||||||||
| UA1665 | ||||||||||||||
| Bi + 22 | Bk + 15 | 40 | Bk + 40 | 30 | 2 | |||||||||
| UA1775 | ||||||||||||||
| Bi + 26 | Bk + 15 | 55 | Bk + 40 | 30 | 2 | |||||||||
| UA1995 | ||||||||||||||
| Bi + 30 | Bk + 20 | 60 | Bk + 60 | 50 | 2 | |||||||||
TKP35 series
| Bk [mm] | b1 [mm] | b4 [mm] | BA [mm] | hA [mm] | s [mm] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TKP35 | ||||||||||||||
| Bi + 12 | Bk + 6 | 25 | Bk + 21 | 20 | 1.5 | |||||||||
EasyTrax® series
| Bk [mm] | b1 [mm] | b4 [mm] | BA [mm] | hA [mm] | s [mm] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ET1455 | ||||||||||||||
| Bi + 16 | Bk + 6 | 25 | Bk + 21 | 20 | 1.5 | |||||||||
K series
| Bk [mm] | b1 [mm] | b4 [mm] | BA [mm] | hA [mm] | s [mm] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| K0650 | ||||||||||||||
| Bi + 28 | Bk + 15 | 40 | Bk + 40 | 30 | 2 | |||||||||
| K0900 | ||||||||||||||
| Bi + 31 | Bk + 15 | 55 | Bk + 40 | 30 | 2 | |||||||||
M series
| Bk [mm] | b1 [mm] | b4 [mm] | BA [mm] | hA [mm] | s [mm] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M0475 | ||||||||||||||
| Bi + 17 | Bk + 6 | 30 | Bk + 21 | 20 | 1.5 | |||||||||
| M0650 | ||||||||||||||
| Bi + 34 | Bk + 15 | 40 | Bk + 40 | 30 | 2 | |||||||||
| M0950 | ||||||||||||||
| Bi + 39 | Bk + 15 | 55 | Bk + 40 | 30 | 2 | |||||||||
| M1250 | ||||||||||||||
| Bi + 45 | Bk + 20 | 60 | Bk + 60 | 50 | 3 | |||||||||
| M1300 | ||||||||||||||
| Bi + 50 | Bk + 20 | 55 | Bk + 60 | 50 | 3 | |||||||||
TKHD series
| Bk [mm] | b1 [mm] | b4 [mm] | BA [mm] | hA [mm] | s [mm] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TKHD85 | ||||||||||||||
| Bi + 54 | Bk + 15 | 60 | Bk + 40 | 30 | 3 | |||||||||
| TKHD90 | ||||||||||||||
| Bi + 70 | Bk + 20 | 70 | Bk + 60 | 70 | 3 | |||||||||
XL series
| Bk [mm] | b1 [mm] | b4 [mm] | BA [mm] | hA [mm] | s [mm] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| XL1650 | ||||||||||||||
| Bi + 68 | Bk + 20 | 70 | Bk + 60 | 70 | 3 | |||||||||
QUANTUM® series
| Bk [mm] | b1 [mm] | b4 [mm] | BA [mm] | hA [mm] | s [mm] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Q040 | ||||||||||||||
| Bi + 40 | Bk + 6 | 30 | Bk + 21 | 20 | 1.5 | |||||||||
| Q060 | ||||||||||||||
| Bi + 52 | Bk + 15 | 40 | Bk + 40 | 30 | 2 | |||||||||
| Q080 | ||||||||||||||
| Bi + 72 | Bk + 15 | 55 | Bk + 40 | 30 | 2 | |||||||||
| Q100 | ||||||||||||||
| Bi + 82 | Bk + 20 | 60 | Bk + 60 | 50 | 3 | |||||||||
TKR series
| Bk [mm] | b1 [mm] | b4 [mm] | BA [mm] | hA [mm] | s [mm] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TKR0200 | ||||||||||||||
| Bi + 16 | Bk + 6 | 25 | Bk + 21 | 20 | 1.5 | |||||||||
| TKR0260 | ||||||||||||||
| Bi + 26 | Bk + 15 | 40 | Bk + 40 | 30 | 2 | |||||||||
| TKR0280 | ||||||||||||||
| Bi + 30 | Bk + 15 | 40 | Bk + 40 | 30 | 2 | |||||||||
TKA series
| Bk [mm] | b1 [mm] | b4 [mm] | BA [mm] | hA [mm] | s [mm] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TKA38 | ||||||||||||||
| Bi + 16 | Bk + 6 | 25 | Bk + 21 | 20 | 1.5 | |||||||||
| TKA45 | ||||||||||||||
| Bi + 16 | Bk + 6 | 25 | Bk + 21 | 20 | 1.5 | |||||||||
| TKA55 | ||||||||||||||
| Bi + 21 | Bk + 15 | 40 | Bk + 40 | 30 | 2 | |||||||||
LS/LSX series
| Bk [mm] | b1 [mm] | b4 [mm] | BA [mm] | hA [mm] | s [mm] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LS/LSX1050 | ||||||||||||||
| Bi + 16/18 | Bk + 15 | 55 | Bk + 40 | 30 | 2 | |||||||||
S/SX series
| Bk [mm] | b1 [mm] | b4 [mm] | BA [mm] | hA [mm] | s [mm] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S/SX0650 | ||||||||||||||
| Bi + 15/17 | Bk + 15 | 40 | Bk + 40 | 30 | 2 | |||||||||
| S/SX0950 | ||||||||||||||
| Bi + 19/21 | Bk + 15 | 55 | Bk + 40 | 30 | 2 | |||||||||
| S/SX1250 | ||||||||||||||
| Bi + 24/26 | Bk + 20 | 60 | Bk + 60 | 50 | 3 | |||||||||
| S/SX1800 | ||||||||||||||
| Bi + 29/32 | Bk + 20 | 70 | Bk + 60 | 50 | 3 | |||||||||
| S/SX2500 | ||||||||||||||
| Bi + 32 | Bk + 25 | 100 | Bk + 75 | 80 | 3 | |||||||||
| S/SX3200 | ||||||||||||||
| Bi + 40 | Bk + 25 | 100 | Bk + 75 | 80 | 3 | |||||||||
The use of a two part support tray strongly depends on the inner width used in the cable carrier. For small inner widths, we recommend using one part support trays. Please contact us.
We will also be happy to manufacture support trays for types S/SX5000 to S/SX9000. Please contact us.
Order
To order the support tray, we need the following information:
- Number of support trays
- Material
- Version of support tray (one part/two parts)
- Part length
- Total length of support tray
- Cable carrier type
- Height of support tray hA
- Inner width of support tray b1
