United States
Call: 800.323.7790 | |  

TKR0200.030

Stay variant 030 – with externally opening and detachable crossbars

TKR0200.030 Start
TKR0200 030 Stay variants
Properties
  • Low-vibration plastic frame with particularly long service life thanks to molded chain links.
  • Swivable and detachable on one side in any position.
  • Outside: Swivable and detachable
  • Inside: detachable
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width
Bi 40 – 120 mm
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type.
Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
Bi
[mm]
Bk
[mm]
qk
[kg/m]
28 37 40 50 60 80 100 120 Bi + 16 0.60 – 1.00
KR
[mm]
557595150

Order example

Order code

TKR0200

80

030

95

800

VS

Inner distribution

Divider systems

The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (Version A).

Fixable dividers are available for applications with lateral accelerations and for applications lying on the side.
The arresting cams click into place in the locking grids in the crossbars (version B).

Divider system TS0

without height separation
TKR0200.030 TS0 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A486
B864
Bi [mm]
aT min [mm]
40
4
50
5
60
6
80
4
100
6
120
6

Divider system TS1

with continuous height separation
TKR0200.030 TS1 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A4862
B8642
Bi [mm]
aT min [mm]
40
4
50
5
60
6
80
4
100
6
120
6

Order example

Order code

TS1

A

3

VD0

VD1

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT].

If using divider systems with height separation (TS1), please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

UMB end connectors UMB – plastic

The universal mounting brackets (UMB) are made from plastic and can be mounted from the top, from the bottom or face on.

TKR0200 UMB end connectors UMB – plastic
TKR0200 UMB end connectors UMB – plastic
TKR0200 UMB end connectors UMB – plastic
Important information

Recommended tightening torque:
0,6 Nm for screws M4

TKR0200 UMB end connectors UMB – plastic
Connection point

F – fixed point
M – driver

Connection type

U – universal mounting bracket

Order example

Order code

UMB

F

U

UMB

M

U

End connector

UMB

UMB

Connection point

F

M

Connection type

U

U

Important information

We recommend the use of strain reliefs before driver and fixed point.

Subject to change.
^