United States
Call: 800.323.7790 | |  

TKHD90 RMF

Aluminum stay RMF – frame stay solid

TKHD90 RMF Start
TKHD90 RMF Stay variants
Properties
  • Aluminum profile bars for heavy loads and large cable carrier widths. Easy threaded connection.
  • Available customized in 1 mm grid.
  • Inside/outside: Threaded joint easy to release.
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width (B<sub>i</sub>) in 1 mm increments
Bi 100 – 800 mm in 1 mm width sections
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t for odd number of chain links
hi
[mm]
hG
[mm]
hG'
[mm]
Bi
[mm] *
Bk
[mm]
qk
[kg/m]
87 117 127.5 100 – 800 Bi + 70 10.37 – 17.47
* in 1 mm width sections
KR
[mm]
250310360500

Order example

Order code

TKHD90

400

RMF

310

2700

VS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

Inner distribution

Divider systems

As a standard, the divider system is mounted on every 2nd chain link on the center bracket. As a standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (Version A).

For applications with lateral acceleration and free hanging on the side, the dividers can be attached by simple insertion of a fixing profile into the RMF stay, available as an accessory (Version B).

Divider system TS0

without height separation
TKHD90 RMF TS0 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A1020152
B12.520155

The dividers can be moved within the cross section (version A) or fixed (version B).

Divider system TS1

with continuous height separation
TKHD90 RMF TS1 EN
TKHD90 RMF TS1 (2) EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A1020152
B12.5201552

The dividers can be moved within the cross section (version A) or fixed (version B).

Order example

Order code

TS1

A

3

VD1

VD3

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT].

If using divider systems with height separation (TS1), please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

End connectors – steel short

The connection variants on the fixed point and on the driver an be combined and changed later on, if necessary.

TKHD90 End Connector short – steel
TKHD90 End Connector short – steel
TKHD90 End Connector short – steel
Connection point

F – fixed point
M – driver

Connection type

I – connection surface inside
A – connection surface outside

Connection surface

A – threaded joint to outside (standard)
I – threaded joint to inside

End connectors LF – steel long

The connection variants on the fixed point and on the driver an be combined and changed later on, if necessary.

TKHD90 End Connector long – steel
TKHD90 End Connector long – steel
Important information

Use only with C-rail.

TKHD90 End Connector long – steel
Connection point

F – fixed point
M – driver

Connection type

I – connection surface inside
A – connection surface outside

Connection surface

A – threaded joint to outside (standard)
I – threaded joint to inside

Order example

Order code

Steel

F

A

I

Steel

M

A

I

End connector

Steel

Steel

Connection point

F

M

Connection type

A

A

Connection surface

I

I

Subject to change.
^