United States
Call: 800.323.7790 | |  

Q080 RS

Aluminum stay RS – frame stay narrow

Q080 RS Start
Q080 RS Stay variants
Properties
  • Extremely quick to open and close
  • Aluminum profile bars for light to medium loads. Assembly without screws.
  • Available customized in 1 mm sections.
  • Outside/inside: release by rotating 90°.
Stay arrangement on every 2<sup>nd</sup> chain link

Stays on every 8th section, standard (HS: half-stayed)

Stay arrangement on every chain link

Stays on every 4th section (VS: fully-stayed)

Inner width (B<sub>i</sub>) in 1 mm increments
Bi 50 – 600 mm in 1 mm width sections
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
hG'
[mm]
Bi
[mm] *
Bk
[mm]
BEF
[mm]
qk
[kg/m]
58 80 88 50 – 600 Bi + 72 Bi + 79.5 1.90 – 2.25
* in 1 mm width sections
KR
[mm]
170200250320420500

Order example

Order code

Q080

400

RS

250

1600

HS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

Inner distribution

Divider systems

The divider system is mounted on each crossbar as a standard – on every 8th section for stay mounting (HS).
As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (Version A).

For applications with lateral acceleration and rotated by 90°, the dividers can be attached by simply clipping on a socket (available as an accessory).
This socket additionally acts as a spacer between the dividers and is available in a 1 mm grid between 3 – 50 mm, as well as 16.5 and 21.5 mm (Version B).

Divider system TS0

without height separation
Q080 RS TS0 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A111410

The dividers can be moved in the cross section.

Divider system TS1

with continuous height separation
Q080 RS TS1 EN
Vers.
aT min
[mm]
aT max
[mm]
ax min
[mm]
ac min
[mm]
nT min
A112514102

The dividers can be moved in the cross section.

Divider system TS2

with partial height separation
Q080 RS TS2 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A1123192

With grid distribution (1 mm grid). The dividers are attached by the height separation, the grid can be moved in the cross section.

Sliding dividers are optionally available (thickness of divider = 4 mm).

Important information

Please note that the real dimensions may deviate slightly from the values indicated here.

Divider system TS3

with height separation consisting of plastic partitions

As a standard, the divider version A is used for vertical partitioning within the cable carrier. The complete divider system can be moved within the cross section.

Divider version A

Q080 RS TS3 Version A

End divider

Q080 RS TS3 End divider
Q080 RS TS3
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A10.5/6.5*14102

* for End divider

The dividers are fixed by the partitions, the complete divider system is movable in the cross section.

Partitions (2.5) EN
ax (center distance of dividers) [mm]
ac (nominal width of inner chamber) [mm]
16
8
18
10
23
15
28
20
32
24
33
25
38
30
43
35
48
40
58
50
64
56
68
60
78
70
80
72
88
80
96
88
112
104
128
120
144
136
160
152
176
168
192
184
208
200

When using partitions with ax > 49 mm we recommended an additional preferential central support. 

Order example

Order code

TS3

A

3

K1

K4

34

38

VR1

VR3

Please state the designation of the divider system (TS0, TS1,...), version and number of dividers per cross section [nT ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax] (as seen from the driver).

If using divider systems with height separation (TS1 – TS3), please also state the positions [e.g. VD23] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

Universal end connectors UMB - plastic (standard)

The universal end connectors (UMB) are made from plastic and can be mounted from the top, from the bottom, face on or from the side.

Q080 Universal end connectors UMB - plastic
Q080 Universal end connectors UMB - plastic
Q080 Universal end connectors UMB - plastic
Connection point

F – fixed point
M – driver

Connection type

U – universal end connector

Order example

Order code

UMB

F

U

UMB

M

U

End connector

UMB

UMB

Connection point

F

M

Connection type

U

U

Important information

We recommend the use of strain reliefs before driver and fixed point.

Subject to change.
^