Q080
Pitch
25 mm
25 mm
Inner height
58 mm
58 mm
Inner widths
50 – 600 mm
50 – 600 mm
Bending radii
170 – 500 mm
170 – 500 mm
All pictographs
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Order code
Important information
Pictographs
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Stay variants
Q080 RS
Frame stay, narrow “The standard”
- Aluminum profile bars for light to medium loads. Assembly without screws.
- Outside/inside: release by rotating 90°.
Q080 RV
Frame stay, reinforced
- Aluminum profile bars with plastic adapter for medium to high loads and large cable carrier widths. Assembly without screws.
- Outside/inside: release by rotating 90°.
Q080 RE
Frame screw-in stay
- Plastic profile bars for light and medium loads. Assembly without screws.
- Outside/inside: release by rotating 90°.
Installation dimensions
Unsupported arrangement
KR [mm] |
H [mm] |
LB [mm] |
UB [mm] |
|---|---|---|---|
170 | 457 | 834 | 379 |
200 | 517 | 928 | 409 |
250 | 617 | 1085 | 459 |
320 | 757 | 1305 | 529 |
420 | 957 | 1619 | 629 |
500 | 1117 | 1870 | 709 |
Load diagram for unsupported length depending on the additional load.
Sagging of the cable carrier is technically permitted for extended travel lengths, depending on the specific application.
Intrinsic cable carrier weight qk max = 2.5 kg/m. For other inner widths, the maximum additional load changes.
Speed
up to 25 m/s
up to 25 m/s
Acceleration
up to 100 m/s2
up to 100 m/s2
Travel length
up to 6.4 m
up to 6.4 m
Additional load
up to 8 kg/m
up to 8 kg/m
Gliding arrangement
Speed
up to 3 m/s
up to 3 m/s
Acceleration
up to 2 – 3 m/s2
up to 2 – 3 m/s2
Travel length
up to 80 m
up to 80 m
Additional load
up to 8 kg/m
up to 8 kg/m
The gliding cable carrier must be guided in a channel. More information
Glide shoes must be used for gliding applications.
Subject to change.
Follow Us On:
U.S. Tsubaki Automotive LLC
Conveyor Operations