United States
Call: 800.323.7790 | |  

MC1300 RMF

Aluminum stay RMF – frame stay solid with optional fixing profile

MC1300 RMF Start
M1300 RMF Stay variants
Properties
  • Aluminum profile bars for heavy loads and large cable carrier widths. Easy threaded connection.
  • Available customized in 1 mm grid.
  • Inside/outside: Threaded joint easy to release.
Stay arrangement on every 2<sup>nd</sup> chain link

Stay arrangement on every 2nd chain link, standard (HS: half-stayed)

Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width (B<sub>i</sub>) in 1 mm increments
Bi 100 – 800 mm in 1 mm width sections
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type.
Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
hG'
[mm]
Bi
[mm] *
Bk
[mm]
qk
[kg/m]
87 120 127.5 100 – 800 Bi + 50 6.24 – 9.59
* in 1 mm width sections
KR
[mm]
150195240280320360400500

Order example

Order code

MC1300

400

RMF

360

6500

HS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

Inner distribution

Divider systems

The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

For applications with lateral acceleration and lying on the side, the dividers can be attached by simple insertion of a fixing profile into the RMF stay, available as an accessory (version B).

Divider system TS0

without height separation
MC1300 RMF TS0 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A7.51510
B1015105

The dividers can be moved within the cross section (version A) or fixed (version B).

Divider system TS1

with continuous height separation
MC1300 RMF TS1 EN
Vers.
aT min
[mm]
aT max
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A7.52515102
B1025151052

The dividers can be moved within the cross section (version A) or fixed (version B).

Divider system TS3

with partial height separation
MC1300 RMF TS3 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A7.516/42*82

* for aluminum partitions

With grid distribution (1 mm grid). The dividers are attached by the height separation, the grid can be moved in the cross section.

Partitions Base

Aluminum partitions with 1 mm increments with ax > 42 mm are also available.

ax (center distance of dividers) [mm]
ac (nominal width of inner chamber) [mm]
16
8
18
10
23
15
28
20
32
24
33
25
38
30
43
35
48
40
58
50
64
56
68
60
78
70
80
72
88
80
96
88
112
104
128
120
144
136
160
152
176
168
192
184
208
200

When using plastic partitions with ax > 112 mm, we recommend an additional center support with a twin divider (ST = 5 mm). Twin dividers are also suitable for retrofitting in the partition system. The height separations VR8 and VR9 are not possible when using twin dividers.

Order example

Order code

TS3

A

3

K1

K5

34

38

VD1

VD3

Please state the designation of the divider system (TS0, TS1,...), version and number of dividers per cross section [nT ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax] (as seen from the driver).

If using divider systems with height separation (TS1 – TS3), please also state the positions [e.g. VD23] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

Universal end connectors UMB – plastic (standard)

The universal mounting brackets (UMB) are made from plastic and can be mounted from the top, from the bottom, face on or from the side.

M1300 End Connector
M1300 End Connector
Important information

Recommended tightening torque: 54 Nm for cheese-head screws ISO 4762 - M10 - 8.8

M1300 End Connector
Connection point

F – fixed point
M – driver

Connection type

U – universal mounting bracket

Order example

Order code

UMB

F

A

UMB

M

A

End connector

UMB

UMB

Connection point

F

M

Connection type

A

A

Important information

We recommend the use of strain reliefs before driver and fixed point.

Subject to change.
^