MK0475 RD 02
Plastic stay RD 02 – frame stay with hinge in the outer radius
Properties
- Plastic profile bars with hinge for light to medium loads.
Assembly without screws. - Available customized in 8 mm grid.
- Outside: swivable to both sides.
- Inside: release by turning by 90°.
Stay arrangement on each chain link (VS: fully-stayed)
Pictographs
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Dimensions
The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Calculating the cable carrier length
hi
[mm]
|
hG
[mm]
|
Bi
[mm]
|
Bk
[mm]
|
BEF
[mm]
|
qk
[kg/m]
| ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 28 | 39 | 24 | 32 | 40 | 48 | 56 | 64 | 72 | 80 | 88 | 96 | 104 | 112 | 120 | 128 | 136 | 144 | 152 | 160 | 168 | 176 | 184 | 192 | 200 | 208 | 216 | 224 | 232 | 240 | 248 | 256 | 264 | 272 | 280 | Bi + 17 | Bi + 17 | 0.79 – 3.03 |
KR
[mm]
| |||||||
|---|---|---|---|---|---|---|---|
| 55 | 75 | 100 | 130 | 160 | 200 | 250 | 300 |
Order example
MK0475
128
RD 2
100
1425
VS
Inner distribution
As a standard, the divider system is mounted on each crossbar – for stay mounting on every 2nd chain link (HS).
As a standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (version A).
The dividers are easily attached to the stay for applications with lateral acceleration and for applications laying on their side by simply turning the frame stay by 180°. The arresting cams click into place in the locking grids in the crossbars (Version B). The groove in the frame stay faces outwards.
| Vers. |
aT min
[mm]
|
ax min
[mm]
|
ac min
[mm]
|
ax grid
[mm]
|
nT min |
|---|---|---|---|---|---|
| A | 6 | 7.8 | 5 | – | – |
| B | 12 | 8 | 5.2 | 8 | – |
The dividers can be moved within the cross section (version A) or fixed (version B).
| Vers. |
aT min
[mm]
|
aT max
[mm]
|
ax min
[mm]
|
ac min
[mm]
|
ax grid
[mm]
|
nT min |
|---|---|---|---|---|---|---|
| A | 6 | 20 | 7.8 | 5 | – | 2 |
| B | 12 | 20 | 8 | 5.2 | 8 | 2 |
The dividers can be moved within the cross section (version A) or fixed (version B).
| Vers. |
aT min
[mm]
|
ax min
[mm]
|
ac min
[mm]
|
ax grid
[mm]
|
nT min |
|---|---|---|---|---|---|
| B | 12 | 8*/24 | 5.2*/21.2 | 8 | 2 |
* for VR0
With grid distribution (8 mm grid). The dividers are fixed by the height separation, the complete divider system is movable in the cross section (version A) or fixed (version B).
Order example
TS2
A
3
K1
K4
34
38
VR1
VR3
End connectors
End connectors – plastic/steel (with strain relief)
Link end connector made of plastic, end connector made of sheet steel with screw-fixed aluminum strain relief. The connection variants on the fixed point and on the driver can be combined and, if required, changed afterwards.
Bi [mm] |
X [mm] | nz |
|---|---|---|
40 | 17.5 | 3 |
56 | 21.5 | 4 |
80 | 17.5 | 6 |
104 | 19 | 8 |
128 | 19.5 | 9 |
152 | 17.5 | 11 |
192 | 18.5 | 14 |
F – fixed point
M – driver
A – threaded joint outside (standard)
I – threaded joint inside
I – connection surface inside
Order example
Plastic/steel
F
A
I
Plastic/steel
M
A
I
Plastic/steel
Plastic/steel
F
M
A
A
I
I
End connectors – plastic/steel
Plastic link end connector, steel end connector. The connection variants on the fixed point and on the driver can be combined and, if required, changed afterwards.
F – fixed point
M – driver
A – threaded joint outside (standard)
I – threaded joint inside
F – flange connection
I – connection surface inside
A – connection surface outside
Order example
Plastic/steel
F
A
A
Plastic/steel
M
U
Plastic/steel
Plastic/steel
F
M
A
U
A
We recommend the use of strain reliefs at the driver and fixed point.
