United States
Call: 800.323.7790 | |  

KC0900 RV

Aluminum stay RV – reinforced frame stay

KC0900 RV Start
K0900 RV Stay variants
Properties
  • Aluminum profile bars plastic adapter for medium to high loads and large cable carrier widths. Assembly without screws.
  • Available customized in 1 mm grid.
  • Outside/inside: to open by rotating 90°.
Stay arrangement on every 2<sup>nd</sup> chain link

Stay arrangement on every 2nd chain link, standard (HS: half-stayed)

Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width (B<sub>i</sub>) in 1 mm increments
Bi 100 – 500 mm in 1 mm width sections
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
Bi
[mm] *
Bk
[mm]
BEF
[mm]
qk
[kg/m]
58 78.5 100 – 500 Bi + 31 Bi + 45 3.20 – 7.00
* in 1 mm width sections
KR
[mm]
130150190245300385

Order example

Order code

KC0900

400

RS

150

1890

HS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

Inner distribution

Divider systems

The divider system is mounted on each crossbar as a standard – on every 2nd chain link for stay mounting (HS – half-stayed).
As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

Divider system TS0

without height separation
KC0900 RV TS0 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A71410

The dividers can be moved in the cross section.

Divider system TS1

with continuous height separation
KC0900 RV TS1 EN
Vers.
aT min
[mm]
aT max
[mm]
ax min
[mm]
ac min
[mm]
nT min
A72514102

The dividers can be moved in the cross section.

Divider system TS2

with partial height separation
KC0900 RV TS2 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A821152

With grid distribution (1 mm grid). The dividers are attached by the height separation, the grid can be moved in the cross section.

Sliding dividers are optionally available (thickness of divider = 4 mm).

Divider system TS3

with height separation consisting of plastic partitions
KC0900 RV TS3 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A416/42*82

* for aluminum partitions

The dividers are fixed by the partitions, the complete divider system is movable in the cross section.

Partitions Base

Aluminum partitions with 1 mm increments with ax > 42 mm are also available.

ax (center distance of dividers) [mm]
ac (nominal width of inner chamber) [mm]
16
8
18
10
23
15
28
20
32
24
33
25
38
30
43
35
48
40
58
50
64
56
68
60
78
70
80
72
88
80
96
88
112
104
128
120
144
136
160
152
176
168
192
184
208
200

When using plastic partitions with ax > 112 mm, we recommend an additional center support with a twin divider (ST = 4 mm). Twin dividers are also suitable for retrofitting in the partition system.

Order example

Order code

TS3

A

3

K1

K4

34

38

VR1

VR3

Please state the designation of the divider system (TS0, TS1,...), version and number of dividers per cross section [nT ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax] (as seen from the driver).

If using divider systems with height separation (TS1 – TS3), please also state the positions [e.g. VD23] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

Universal end connectors UMB plastic (standard)

The universal mounting brackets (UMB) are made from plastic and can be mounted from the top, from the bottom, face on or from the side.

K0900 Universal end connectors UMB – plastic
K0900 Universal end connectors UMB – plastic
K0900 Universal end connectors UMB – plastic
Connection point

F – fixed point
M – driver

Connection type

U – universal mounting bracket

Order example

Order code

UMB

F

U

UMB

M

U

End connector

UMB

UMB

Connection point

F

M

Connection type

U

U

Important information

We recommend the use of strain reliefs before driver and fixed point.

Subject to change.
^