United States
Call: 800.323.7790 | |  

S/SX0950 RMD

Aluminum stay RMD – aluminum cover system

S/SX0950 RMD Tubes Start
S/SX0950 RMD Tubes Stay variants
Properties
  • Bolted aluminum covers for maximum stability.
  • For applications generating chips or coarse contamination.
  • Available customized in 1 mm grid.
  • Inside/outside: Threaded joint easy to release.
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width (B<sub>i</sub>) in 1 mm increments
Bk 125 – 600 mm in 1 mm width sections
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
hG'
[mm]
Bi
[mm]
BSt
[mm] *
Bk
[mm]
BEF
[mm]
qk
[kg/m]
44 68 73 88 – 563 106 – 581 BSt + 19 BSt + 28 9.97 – 21.95
* in 1 mm width sections
KR
[mm]
170200260290320350410600

Order example

Order code

S0950

107

RMD

200

St

2375

HS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

Inner distribution

Divider systems

As a standard, the divider system is mounted on every 2nd cover/chain link (HS).

As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

Divider system TS0

without height separation
S/SX0950 RMD Tubes TS0 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A121410

The dividers can be moved in the cross section.

Divider system TS1

with continuous height separation
S/SX0950 RMD Tubes TS1 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A1214102

The dividers can be moved in the cross section.

Order example

Order code

TS1

A

3

VD0

VD1

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT].
If using divider systems with height separation (TS1), please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.
The end dividers are part of the divider system and don‘t have to be ordered separately.

End connectors

End connectors – steel

End connectors made of steel. The connection variants on the fixed point and on the driver can be combined and changed later on, if necessary.

S/SX0950 Tubes End Connector
S/SX0950 Tubes End Connector
S/SX0950 Tubes End Connector
S/SX0950 Tubes End Connector
S/SX0950 Tubes End Connector
Connection point

F – fixed point
M – driver

Connection type

A – threaded joint to outside (standard)
I – threaded joint to inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Connection surface

I – connection surface inside
A – connection surface outside

Important information

Caution: The standard connection variant FAI/MAI is only possible from Bk of 122 mm.

Order example

Order code

Steel

F

A

I

Steel

M

A

I

End connector

Steel

Steel

Connection point

F

M

Connection type

A

A

Connection surface

I

I

Important information

We recommend the use of strain reliefs before driver and fixed point.

Subject to change.
^