S/SX Tubes series
Extremely robust and sturdy covered steel cable carriers
- Aluminum covers available in 1 mm width sections
- 4 bolted aluminum covers for extreme loads
- Joint design with hardened bolts for long service life
- Cranked link plate design
- Can be opened on the inside and the outside for cable laying
- Different separation options for the cables
- Extremely robust side bands, galvanized or stainless steel
- Steel band cover available in 1 mm width sections
- Replaceable glide shoes
- End connectors for different connection variants
Features
- Extremely robust, sturdy steel cable carriers for heavy mechanical loads and rough environmental conditions
- Side bands made of galvanized steel (S series) or corrosion-resistant and acid-resistant steel (SX series) in three qualities: ER 1 / ER 1S and ER 2
- Very sturdy link plates, each consisting of two individual plates
- Very extensive unsupported lengths even with large additional loads
- Joint design with multi stroke system and hardened bolt
- Bolted stay systems, solid end connectors
- Explosion protection with classification EX II 2 GD as per ATEX RL
The design
Proven steel cable carriers with extremely sturdy link plates and dedicated joint design with multi stroke system and hardened bolt. The extremely sturdy design allows extensive unsupported lengths and high possible additional loads.
Pictographs
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Sandwich design: Link plates consist of two plates
Glide shoes available for gliding applications
Stroke system with hardened bolt and circlips
Also available as open variants with different stay
Types
S/SX0650 Tubes
Inner height
[hi]:
30 mm
Chain widths
[Bk]:
100
– 500
mm
Pitch [t]:
65
mm
Bending [KR]:
115 – 400
mm
S/SX0950 Tubes
Inner height
[hi]:
44 mm
Chain widths
[Bk]:
125
– 600
mm
Pitch [t]:
95
mm
Bending [KR]:
170 – 600
mm
S/SX1250 Tubes
Inner height
[hi]:
69 mm
Chain widths
[Bk]:
150
– 800
mm
Pitch [t]:
125
mm
Bending [KR]:
200 – 1000
mm
S/SX1800 Tubes
Inner height
[hi]:
104 mm
Chain widths
[Bk]:
250
– 1000
mm
Pitch [t]:
180
mm
Bending [KR]:
320 – 1300
mm
Downloads
Subject to change.
Follow Us On:
U.S. Tsubaki Automotive LLC
Conveyor Operations