United States
Call: 800.323.7790 | |  

XLT1650 RMD

Aluminum stay RMD – aluminum cover system

XLT1650 RMD Start
XLT1650 RMD Stay variants
Properties
  • Bolted aluminum covers for maximum stability
  • For applications generating swarf or coarse contamination
  • Available customized in 1 mm grid.
  • Inside/outside: Threaded joint easy to release.
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width (B<sub>i</sub>) in 1 mm increments
Bi 200 – 1000 mm in 1 mm width sections
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type.
Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t for odd number of chain links
hi
[mm]
hG
[mm]
hG'
[mm]
Bi
[mm] *
Bk
[mm]
qk
[kg/m]
105 140 147 200 – 1000 Bi + 68 10.50 – 15.30
* in 1 mm width sections
KR
[mm]
300350400450500550

Order example

Order code

XLT1650

420

RMD

350

2850

VS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

Inner distribution

Divider systems

The divider system is mounted on each crossbar as a standard – on every 2nd chain link for stay mounting (HS).
As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

Divider system TS0

without height separation
XLT1650 RMD TS0 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A62517

The dividers can be moved in the cross section.

Divider system TS3

with height separation consisting of plastic partitions
XLT1650 RMD TS3 (1) EN
XLT1650 RMD TS3 (2) EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A116/42*82

* for aluminum partitions

The dividers are fixed with the partitions. The entire divider system can be moved in the cross section.

Partitions Base

Aluminum partitions in 1 mm width sections with ax > 42 mm are also available.

ax (center distance of dividers) [mm]
ac (nominal width of inner chamber) [mm]
16
8
18
10
23
15
28
20
32
24
33
25
38
30
43
35
48
40
58
50
64
56
68
60
78
70
80
72
88
80
96
88
112
104
128
120
144
136
160
152
176
168
192
184
208
200

When using plastic partitions with ax > 112 mm, we recommend an additional center support with a twin divider (ST = 5 mm). Twin dividers are also suitable for retrofitting in the partition system.

Order example

Order code

TS3

A

3

K1

K4

34

38

VR1

VR3

Please state the designation of the divider system (TS0, TS3), the version, and the number of dividers per cross section [nT]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax].

End connectors

End connectors – steel

End connectors made of steel. The connection variants on the fixed point and on the driver an be combined and changed later on, if necessary.

XLT1650 End connector
XLT1650 End connector
XLT1650 End connector
XLT1650 End connector
XLT1650 End connector
Connection point

F – fixed point
M – driver

Connection type

A – threaded joint outside (standard)
– threaded joint inside
F – flange connection

Connection surface

I – connection surface inside
A – connection surface outside

Order example

Order code

Steel

F

A

I

Steel

M

A

I

End connector

Steel

Steel

Connection point

F

M

Connection type

A

A

Connection surface

I

I

Important information

We recommend the use of strain reliefs before driver and fixed point.

Subject to change.
^