TKA series
Chip-tight right to the end
- End connectors with optional strain relief
- Interior gentle on the cables without projecting edges
- Integrated noise damping
- Dividers and height separations for separating the cables
- Quick and easy opening from any position
- Secure cover attachment even under severe stresses (e.g. from hydraulic lines)
- Chain links made of glass-fiber reinforced plastic
- Bolt/hole connection and stroke system covered completely
- Designs with inward or outward opening crossbars
- Covers completely detachable on one side
- Cover sheet for universal end connectors
Features
- Excellent cable protection in the connector area
- Chip and dirt resistant due to smooth surfaces
- Extensive unsupported length
- High torsional rigidity
- Low noise emission
- Optional: On request, special material with protection against hot chips up to 850 °C
- Numerous custom material types for custom applications available
- Easy-to-open cover with simultaneously high retention force on the chain link during operation
- Measurement scale for easy alignment of the dividers
- TKA55: IP54 tested and certified*
Pictographs
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Optimized utilization of the interior space; vertical and horizontal inner distribution possible
Easy-open covers from any position offer secure fastening
Triple-stroke system for extensive unsupported length
Universal end connector with option for integrating strain relief elements
Types
TKA30
Inner height
[hi]:
20.5
mm
Inner widths
[Bi]:
15 – 65
mm
Pitch [t]:
30.5
mm
Bending [KR]:
55 – 180
mm
TKA38
Inner height
[hi]:
26
mm
Inner widths
[Bi]:
25 – 130
mm
Pitch [t]:
38.5
mm
Bending [KR]:
70 – 230
mm
TKA45
Inner height
[hi]:
36
mm
Inner widths
[Bi]:
50 – 150
mm
Pitch [t]:
45.5
mm
Bending [KR]:
82 – 230
mm
TKA55
Inner height
[hi]:
45
mm
Inner widths
[Bi]:
50 – 250
mm
Pitch [t]:
55.5
mm
Bending [KR]:
100 – 300
mm
Subject to change.
Follow Us On:
U.S. Tsubaki Automotive LLC
Conveyor Operations