United States
Call: 800.323.7790 | |  

MT0650 RMD

Aluminum cover RMD – cover with hinge in the outer radius

MT0650 RMD Start
MT0650 RMD Stay variants
Properties
  • Aluminum cover system with hinge for light and medium loads. Assembly without screws.
  • Available customized in 1 mm sections.
  • Outside: swivable to both sides.
  • Inside: release by turning 90°.
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width (B<sub>i</sub>) in 1 mm increments
Bi 100 – 500 mm in 1 mm width sections
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Important information

For rough environmental conditions, we recommend the use of OFFROAD glide shoes with 80 % higher wear volume.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
hG'
[mm]
hG' Offroad
[mm]
Bi
[mm] *
Bk
[mm]
qk
[kg/m]
38.5 57 60.6 62.2 100 – 500 Bi + 34 3.73 – 10.12
* in 1 mm width sections
KR
[mm]
115145175220260275300350

Order example

Order code

MT0650

300

RMD

175

1430

VS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

Inner distribution

Divider systems

As a standard, the divider system is mounted on every 2nd chain link.

As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

 

Divider system TS0

without height separation
MT0650 RMD TS0 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A161310

The dividers can be moved in the cross section.

Divider system TS1

with continuous height separation
MT0650 RMD TS1 EN
Vers.
aT min
[mm]
aT max
[mm]
ax min
[mm]
ac min
[mm]
nT min
A164013102

The dividers can be moved in the cross section.

Order example

Order code

TS1

A

3

VD1

VD3

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT].

If using divider systems with height separation (TS1), please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

Universal end connectors UMB – plastic (standard)

The universal end connectors (UMB) are made from plastic and can be mounted from the top, from the bottom, face on or from the side.

MT0650 Universal end connectors UMB - plastic
MT0650 Universal end connectors UMB - plastic
Important information

Recommended tightening torque: 11 Nm for cheese-head screws ISO 4762 - M6 - 8.8

MT0650 Universal end connectors UMB - plastic
Connection point

F – fixed point
M – driver

Connection type

U – universal end connector

End connectors – plastic/steel

Plastic link end connector, steel end connector. The connection variants on the fixed point and on the driver can be combined and, if required, changed afterwards.

MT0650 End connectors - plastic/steel
MT0650 End connectors - plastic/steel
MT0650 End connectors - plastic/steelMT0650 End connectors - plastic/steel
Connection point

F – fixed point
M – driver

Connection type

A – threaded joint outside (standard)
I – threaded joint inside
F – flange connection

Connection surface

I – connection surface inside
A – connection surface outside

Order example

Order code

Plastic/steel

F

A

A

UMB

M

U

 

End connector

Plastic/steel

UMB

Connection point

F

M

Connection type

A

U

Connection surface

A

Important information

We recommend the use of strain reliefs before driver and fixed point.

Subject to change.
^