United States
Call: 800.323.7790 | |  

S/SX2500 RM

Aluminum stay RM –  frame stay, solid

S/SX2500 RM Start
S/SX2500 RM Stay variants
Properties
  • Aluminum profile bars for heavy loads and maximum cable carrier widths. Double threaded joint on both sides “Heavy Duty”.
  • Available customized in 1 mm grid.
  • Inside/outside: Threaded joint easy to release.
HeavyDuty
Stay arrangement on every 2<sup>nd</sup> chain link

Stay arrangement on every 2nd chain link, standard (HS: half-stayed)

Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width (B<sub>i</sub>) in 1 mm increments
Bk 250 – 1200 mm in 1 mm width sections
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t for odd number of chain links
hi
[mm]
hG
[mm]
Bi
[mm]
BSt
[mm] *
Bk
[mm]
qk
[kg/m]
183 220 175 – 1125 218 – 1168 BSt + 32 38.68 – 44.58
* in 1 mm width sections
KR
[mm]
365445600760920107512351395

Order example

Order code

S2500

806

RM

760

St

9250

HS

Inner distribution

Divider systems

As a standard, the divider system is mounted on each crossbar – for stay mounting on every 2nd chain link (HS).
As a standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (version A).

Divider system TS0

without height separation
S/SX2500 RM TS0 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A192513

The dividers can be moved in the cross section.

Divider system TS1

with continuous height separation
S/SX2500 RM TS1 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A1925132

The dividers can be moved in the cross section.

Divider system TS2

with partial height separation
S/SX2500 RM TS2 (1) EN
S/SX2500 RM TS2 (2) EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A4046342

Standard height separation with tube Ø 16 mm. The dividers can be moved in the cross section.

Order example

Order code

TS1

A

2

K1

K3

34

38

VD1

VD3

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax] (as seen from the driver).

If using divider systems with height separation (TS1 – TS2), please also state the positions (e.g. VD23) viewed from the left driver belt. You are welcome to add a sketch to your order.

 

End connectors

End connectors – steel

End connectors made of steel. The connection variants on the fixed point and on the driver can be combined and, if required, changed afterwards.

S/SX2500 End Connector
S/SX2500 End Connector
S/SX2500 End Connector
Connection point

F – fixed point
M – driver

Connection type

A – threaded joint outside (standard)
I – threaded joint inside

Order example

Order code

Steel

F

A

Steel

M

A

End connector

Steel

Steel

Connection point

F

M

Connection type

A

A

Important information

We recommend the use of strain reliefs before driver and fixed point.

Subject to change.
^