United States
Call: 800.323.7790 | |  

S/SX1800 RM

Aluminum stay RM – frame stay, solid

S/SX1800 RM Start
S/SX1800 RM Stay variants
Properties
  • Aluminum profile bars for heavy loads and maximum cable carrier widths. Double threaded joint on both sides “Heavy Duty”.
  • Available customized in 1 mm grid.
  • Inside/outside: Threaded joints easy to release.
HeavyDuty
Stay arrangement on every 2<sup>nd</sup> chain link

Stay arrangement on every 2nd chain link, standard (HS: half-stayed)

Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width (B<sub>i</sub>) in 1 mm increments
Bk 250 – 1000 mm in 1 mm width sections
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
hG'
[mm]
Bi
[mm]
BSt
[mm] *
Bk
[mm]
BEF
[mm]
qk
[kg/m]
108 140 155 188 – 938 221 – 971 BSt + 29 BSt + 40 24.08 – 28.46
* in 1 mm width sections
KR
[mm]
26532037543549060572089011751300

Order example

Order code

S1800

417

RM

375

St

5940

HS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

Inner distribution

Divider systems

The divider system is mounted on each crossbar as a standard – on every 2nd chain link for stay mounting (HS – half-stayed).
As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

Divider system TS0

without height separation
S/SX1800 RM TS0 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A21.52517.5

The dividers can be moved in the cross section.

Divider system TS1

with continuous height separation
S/SX1800 RM TS1 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A21.52517.52

The dividers can be moved in the cross section.

Divider system TS3

with height separation consisting of plastic partitions
S/SX1800 RM TS3 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A11.516/42*82

* for aluminum partitions

The dividers are fixed with the partitions. The entire divider system can be moved in the cross section.

Partitions Base

Aluminum partitions with 1 mm increments with ax > 42 mm are also available.

ax (center distance of dividers) [mm]
ac (nominal width of inner chamber) [mm]
16
8
18
10
23
15
28
20
32
24
33
25
38
30
43
35
48
40
58
50
64
56
68
60
78
70
80
72
88
80
96
88
112
104
128
120
144
136
160
152
176
168
192
184
208
200

When using plastic partitions with ax > 112 mm, we recommend an additional center support with a twin divider (ST = 4 mm). Twin dividers are also suitable for retrofitting in the partition system.

Order example

Order code

TS3

A

3

K1

K5

34

38

VD1

VD3

Please state the designation of the divider system (TS0, TS1,...), version and number of dividers per cross section [nT ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax] (as seen from the driver).

If using divider systems with height separation (TS1 – TS3), please also state the positions [e.g. VD23] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

End connectors – steel

End connectors made of steel. The connection variants on the fixed point and on the driver can be combined and changed later on, if necessary.

S/SX1800 End Connector
S/SX1800 End Connector
S/SX1800 End Connector
S/SX1800 End Connector
S/SX1800 End Connector
Connection point

– fixed point
– driver

Connection type

– threaded joint to outside (standard)
– threaded joint to inside
– threaded joint, rotated 90° to the outside
– threaded joint, rotated 90° to the inside

Connection surface

– connection surface inside
– connection surface outside

Important information

Caution: The standard connection variant FAI/MAI is only possible from Bk of 139 mm.

Order example

Order code

Steel

F

A

I

Steel

M

A

I

End connector

Steel

Steel

Connection point

F

M

Connection type

A

A

Connection surface

I

I

Important information

We recommend the use of strain reliefs before driver and fixed point.

Subject to change.
^