United States
Call: 800.323.7790 | |  

S/SX1250 RR

Tube stay RR – frame stay, tube version

S/SX1250 RR Start
S/SX1250 RR Stay variants
Properties
  • Steel rolling stays with gentle cable support and plastic dividers. Ideal for using media hoses with soft sheathing. Easy screw connection.
  • Available customized in 1 mm width sections.
  • Inside/outside: Screw connection detachable
  • Option: Divider systems made from steel and stainless steel ER 1, ER 1S.
Stay arrangement on every 2<sup>nd</sup> chain link

Stay arrangement on every 2nd chain link, standard (HS: half-stayed)

Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width (B<sub>i</sub>) in 1 mm increments
Bk 200 – 600 mm in 1 mm width sections
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type.
Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
hG'
[mm]
Bi
[mm]
BSt
[mm] *
Bk
[mm]
BEF
[mm]
qk
[kg/m]
66 94 104 160 – 560 176 – 576 BSt + 24 BSt + 30 13.82 – 17.30
* in 1 mm width sections
KR
[mm]
1452002202603003403804204605005406001000

Order example

Order code

S1250

400

RR

200

St

4750

HS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

Inner distribution

Divider systems

As a standard, the divider system is mounted on each crossbar – for stay mounting on every 2nd chain link (HS).
The dividers are fixed through the tubes. The tube additionally serves as a spacer between the dividers (version B).

Divider system TS0

without height separation
S/SX1250 RR TS0 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
B303026

Divider system TS1

with continuous height separation
S/SX1250 RR TS1 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
B3030262

Order example

Order code

TS1

B

3

K1

K4

34

38

VD0

VD0

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax] (as seen from the driver).

End connectors

End connectors – steel

End connectors made of steel. The connection variants on the fixed point and on the driver can be combined and changed later on, if necessary.

S/SX1250 End Connector
S/SX1250 End Connector
S/SX1250 End Connector
S/SX1250 End Connector
S/SX1250 End Connector
Connection point

F – fixed point
M – driver

Connection type

A – threaded joint to outside (standard)
I – threaded joint to inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Connection surface

I – connection surface inside
A – connection surface outside

Important information

Caution: The standard connection variant FAI/MAI is only possible from Bk of 125 mm.

Order example

Order code

Steel

F

A

I

Steel

M

A

I

End connector

Steel

Steel

Connection point

F

M

Connection type

A

A

Connection surface

I

I

Important information

We recommend the use of strain reliefs before driver and fixed point.

Subject to change.
^