United States
Call: 800.323.7790 | |  

S/SX0950 RS 2

Aluminum stay RS 2 – frame stay narrow, threaded joint

S/SX0950 RS 2 Start
S/SX0950 RS 2 Stay variants
Properties
  • Quick to open and close
  • Aluminum profile bars for light to medium loads. Simple threaded joint
  • Available customized in 1 mm width sections.
  • Outside/inside: Threaded joint easy to release.
Stay arrangement on every 2<sup>nd</sup> chain link

Stay arrangement on every 2nd chain link, standard (HS: half-stayed)

Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width (B<sub>i</sub>) in 1 mm increments
Bk 150 – 400 mm in 1 mm width sections
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
hG'
[mm]
Bi
[mm]
BSt
[mm] *
Bk
[mm]
BEF
[mm]
qk
[kg/m]
46 68 73 113 – 363 131 – 381 BSt + 19 BSt + 28 7.55 – 8.21
* in 1 mm width sections
KR
[mm]
125140170200260290320350410600

Order example

Order code

S0950

150

RS2

200

St

2375

HS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

Inner distribution

Divider systems

The divider system is mounted on each crossbar as a standard – on every 2nd chain link for stay mounting (HS – half-stayed).
As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

For applications with lateral acceleration and rotated by 90°, the dividers can be attached by simply clipping onto a socket (available as an accessory). 
This socket additionally acts as a spacer between the dividers and is available in a 1 mm grid between 3 – 50 mm, as well as 16.5 and 21.5 mm (Version B).

Divider system TS0

without height separation
S/SX0950 RS 2 TS0
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A121410

The dividers can be moved in the cross section.

Divider system TS1

with continuous height separation
S/SX0950 RS 2 TS1 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A1214102

The dividers can be moved in the cross section.

Order example

Order code

TS1

A

3

VD0

VD1

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT].

If using divider systems with height separation (TS1), please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.

The end pieces are part of the divider system and don‘t have to be ordered separately.

End connectors

End connectors – steel

End connectors made of steel. The connection variants on the fixed point and on the driver can be combined and changed later on, if necessary.

S/SX0950 End Connector
S/SX0950 End Connector
S/SX0950 End Connector
S/SX0950 End Connector
S/SX0950 End Connector
Connection point

F – fixed point
M – driver

Connection type

A – threaded joint to outside (standard)
I – threaded joint to inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Connection surface

I – connection surface inside
A – connection surface outside

Important information

Caution: The standard connection variant FAI/MAI is only possible from Bk of 122 mm.

Order example

Order code

Steel

F

A

I

Steel

M

A

I

End connector

Steel

Steel

Connection point

F

M

Connection type

A

A

Connection surface

I

I

Important information

We recommend the use of strain reliefs before driver and fixed point.

Subject to change.
^