LS/LSX1050
Pitch
105 mm
105 mm
Inner heights
48 – 58 mm
48 – 58 mm
Outer widths
100 – 600 mm
100 – 600 mm
Bending radii
105 – 430 mm
105 – 430 mm
All pictographs
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Order code
Important information
Pictographs
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Stay variants
LS/LSX1050 RS 2
Frame stay narrow, bolted
- Quick to open and close.
- Aluminum profile bars for light to medium loads. Easy threaded connection.
- Inside/outside: Threaded joint easy to release.
LS/LSX1050 RV
Frame stay, reinforced
- Aluminum profile bars for medium to heavy loads and large cable carrier widths. Double threaded joint on both sides.
- Inside/outside: Threaded joint easy to release.
LS/LSX1050 RR
Frame stay, tube version
- Steel rolling stays with gentle cable support and steel dividers. Ideal for using media hoses with soft sheathing.
- Inside/outside: Screw connection detachable.
LS/LSX1050 LG
Frame stay, split
- Optimum cable routing in the neutral bending line. Split version for easy cable routing. Stays also available unsplit.
- Inside/outside: Threaded joint easy to release.
LS/LSX1050 RMA
Mounting frame stay
- Aluminum profile bars with plastic mounting frame stays for guiding very large cable diameters.
- Outside/inside: Screw-fixing easy to release.
Installation dimensions
Unsupported arrangement
KR [mm] |
H [mm] |
LB [mm] |
UB [mm] |
|---|---|---|---|
105 | 330 | 540 | 250 |
125 | 370 | 603 | 270 |
155 | 430 | 697 | 300 |
195 | 510 | 823 | 340 |
260 | 640 | 1027 | 405 |
295 | 710 | 1137 | 440 |
325 | 770 | 1231 | 470 |
365 | 850 | 1357 | 510 |
430 | 980 | 1561 | 575 |
Installation height Hz: H + 10 mm/m
Load diagram for unsupported length depending on the additional load.
Intrinsic cable carrier weight qk = 3.8 kg/m. For other inner widths, the maximum additional load changes.
Speed
up to 5 m/s
up to 5 m/s
Acceleration
up to 10 m/s2
up to 10 m/s2
Travel length
up to 9.5 m
up to 9.5 m
Additional load
up to 35 kg/m
up to 35 kg/m
Subject to change.
Follow Us On:
U.S. Tsubaki Automotive LLC
Conveyor Operations