Call: 800.323.7790 | |  

LS/LSX series

Cost-effective steel chains with light design

  1. All stays available in 1 mm width sections
  2. 4-fold bolted aluminum stays for extreme loads
  3. Rolling stays
  4. Aluminum hole stays
  5. Mounting frame stays
  6. Stops integrated into link plate – no additional bolts required 
  7. Different separation options for the cables
  8. Plastic or steel dividers
  9. Weight-optimized side bands made of hardened steel or stainless steel
  10. Optional center bolt for applications with high loads
  11. Good ratio of inner to outer width – no end divider required
  12. End connectors for different connection variants
Inner width (B<sub>i</sub>) in 1 mm increments
Opens inward/outward
Covered cable carrier
Sliding dividers
Height separation possible
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Low weight
All pictographs
LS/LSX series Features 1

Weight-optimized link plates consist of only one plate – the stop system is integrated

LS/LSX series Features 2

Lightweight side bands without additional bolts – hardened steel or stainless steel

LS/LSX series Features 3

Optional: Center bolts and circlip for applications with high loads

LS/LSX series Features 4

Optional: C-rail for strain relief elements attached in the connection

Sturdy and durable, even under extreme conditions

Double-band steel cable carrier LS1050
  • Up to 40% longer unsupported lengths compared to LS1050 with standard side band with the same additional load, as part of the load diagram
  • Very high additional loads: up to 40 kg/m possible
  • Long service life even with high dynamic loads
  • High travel speeds
LS/LSX series Stable

Longer service life through hardened side bands

The hardened surface significantly increases the service life of the LS1050. Tests were carried out on cable carriers with identical designs.
The LS1050 is therefore ideal for applications with many travel cycles, for example in 3-shift operation.

LS/LSX series Compare Lifetime EN

Significantly higher unsupported lengths compared to plastic cable carriers of a similar size

Load diagram for unsupported length depending on the additional load

Graphic Unsupported arrangement EN
LS/LSX series Load diagram EN

Weight-optimized through adapted link plate design

LS/LSX series Compare weight optimization EN

Type

LS/LSX1050

Inner heights [hi]:
54 – 58 mm
Chain widths [Bk]:
100 – 600 mm
Pitch [t]:
105 mm
Bending [KR]:
105 – 430 mm
more details
Subject to change.
^