United States
Call: 800.323.7790 | |  

UA1555.020

Stay variant 020 – closed frame

UA1555.020 Start
UA1555 020 Stay variants
Properties
  • Weight-optimised, closed plastic frame with particularly high torsional rigidity.
  • Outside/inside: not openable.
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width
Bi 50 – 150 mm
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type.
Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
hG'
[mm]
Bi
[mm]
Bk
[mm]
BEF
[mm]
qk
[kg/m]
38 50 53 50 75 100 125 150 Bi + 18 Bi + 22 1.13 – 1.52
KR
[mm]
6380100125160200230*

* only Bi 100

Order example

Order code

UA1555

020

125

160

1887

VS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

Inner distribution

Divider systems

The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

For applications with lateral acceleration and lying on the side, divider with arresting cams are available.
The locking cams click into place in the locking grids in the crossbars (version B).

Divider system TS0

without height separation
UA1555 TS0 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A5107.5
B5107.52.5

Number of dividers for design 020 depending on Bi
* not for design 020

Divider system TS1

with continuous height separation*
UA1555 TS1 EN
Vers.
aT min
[mm]
aT max
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A520107.52
B520.5107.52.52

* not for design 020

Divider system TS3

with height separation consisting of plastic section subdivisions*
UA1555 TS3 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A3.515102

* not for design 020

The dividers are fixed with the partitions. The entire divider system can be moved in the cross section.

UA1555 Partitions EN
ax (center distance of dividers) [mm]
ac (nominal width of inner chamber) [mm]
15
10
20
15
25
20
30
25
35
30
40
35
45
40
55
50
65
60
75
70

Order example

Order code

TS3

A

2

K1

K4

34

38

VR1

VR3

Please state the designation of the divider system (TS0, TS1,...), version and number of dividers per cross section [nT ]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax] (as seen from the driver).

If using divider systems with height separation (TS1 – TS3), please also state the positions [e.g. VD23] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

Universal end connectors UMB – plastic (standard)

The universal mounting brackets (UMB) are made from plastic and can be mounted from above, from below or on the face side.

UA1555 End Connector UMB
UA1555 End Connector UMB
Important information

Recommended tightening torque: 
5 Nm for screws M5 - 8.8

Bi
[mm]
nz
50
2 x 3
75
2 x 5
90
2 x 6
100
2 x 7
125
2 x 9
150
2 x 11
UA1555 End Connector UMB

The end connectors are optionally also available with strain relief comb or with C-rail Art. no. 3931 (1 on each side) for clamps. Please state when ordering.

UA1555 End Connector UMB
Connection point

F – fixed point
M – driver

Connection type

U – universal mounting bracket

Order example

Order code

UMB

F

U

UMB

M

U

End connector

UMB

UMB

Connection point

F

M

Connection type

U

U

Important information

We recommend the use of strain reliefs before driver and fixed point.

Single-part end connectors short – plastic

The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector.

UA1555 End Connector
UA1555 End Connector
Important information

Recommended tightening torque: 
6 Nm for screws M6 - 8.8

Bi
[mm]
nz
50
2 x 4
75
2 x 6
100
2 x 8
125
2 x 10
150
2 x 12
UA1555 End Connector

The end connectors are optionally also available without strain relief comb. Please state when ordering.

UA1555 End Connector
Connection point

F – fixed point
M – driver

Connection type

A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Order example

Order code

End connector

F

A

End connector

M

A

End connector

End connector

End connector

Connection point

F

M

Connection type

A

A

Single-part end connectors long – plastic

The plastic end connectors can be connected from above or below and allow a 1: 1 replacement of the UNIFLEX 0555 in the connection area. The connection type can be changed by altering the position of the end connector.

UA1555 End Connector long – plastic
UA1555 End Connector long – plastic
Important information

Recommended tightening torque: 
6 Nm for screws M6 - 8.8

Bi
[mm]
nz
50
2 x 4
75
2 x 6
100
2 x 8
125
2 x 10
150
2 x 12
UA1555 End Connector long – plastic

The end connectors are optionally also available without strain relief comb. Please state when ordering.

UA1555 End Connector long – plastic
Connection point
Connection type

F – fixed point
M – driver

Connection surface

A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Order example

Order code

End connector U0555

F

A

End connector U0555

M

A

End connector

End connector U0555

End connector U0555

Connection point

F

M

Connection type

A

A

Subject to change.
^