United States
Call: 800.323.7790 | |  

TKK39.020

Stay variant 020 – closed frame

TKK39.020 Start
TKK39 020 Stay variants
Properties
  • Weight-optimised, closed plastic frame with particularly high torsional rigidity.
  • Outside/inside: closed.
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width
Bi 59 – 99 mm
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
Bi
[mm]
Bk
[mm]
qk
[kg/m]
39 50 59 – 99 Bi + 21 1.24 – 2.08
KR
[mm]
46587095

Order example

Order code

TKK39

020

74

70

1950

VS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

Inner distribution

Divider systems

The divider system is mounted on every 2nd chain link as a standard. 
Dividers, and the complete divider system (dividers with height separations) comes as diameter adjustable as standard (Version A).

For applications with lateral accelerations and applications with the cable carrier rotated by 90°, the dividers can easily be fixed on the stay. 
The arresting cams snap into the catch profiles in the crossbars (version B).

Divider system TS0

without height separation
TKK39 TS0 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A5107
B51072

* not for design 020

The dividers can be moved in the cross section.

Divider system TS1

with continuous height separation*
TKK39 TS1
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A51072
B510722

* not for design 020

The dividers can be moved in the cross section.

Order example

Order code

TS1

A

3

VD1

VD3

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT].

If using divider systems with height separation (TS1), please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

End connectors – steel

The steel end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector.

TKK39 End connector
TKK39 End connector
TKK39 End connector
TKK39 End connector
Connection point

F – fixed point
M – driver

Connection type

I – connecting surface inside
A – connecting surface outside

Connection surface

A – threaded joint outside (standard)
I – threaded joint inside

Order example

Order code

Steel

F

A

I

Steel

M

A

I

End connector

Steel

Steel

Connection point

F

M

Connection type

A

A

Connection surface

I

I

Important information

We recommend the use of strain reliefs before driver and fixed point.

Subject to change.
^