Stay variant 040 – with inside opening crossbars

QT0250 040 Stay variants

Properties

  • Weight-optimised plastic frame with particularly high torsional rigidity.
  • Crossbars can be opened at any position on one side
  • Inside: openable.
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width
Bi 30 – 50 mm

Dimensions

Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
Dimensions
hi
[mm]
hG
[mm]
Bi
[mm]
Bk
[mm]
qk
[kg/m]
17.6 23 30 50 Bi + 10 0.32 – 0.36
KR
[mm]
2838456075100

Order example

Order code

QT0250

040

50

75

1100

VS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

Inner distribution

Divider systems

The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

For applications with lateral accelerations and applications with the cable carrier rotated by 90°, the dividers can easily be fixed on the stay through rotation. The arresting cams snap into the catch profiles in the covers (version B).

Divider system TS0 without height separation
QT0250 TS0
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A364
B3642
Divider system TS1 with continuous height separation
QT0250 TS1
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
ax grid
[mm]
nT min
A3642
B36422

Order example

Order code

TS1

A

3

VD0

VD1

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT].

If using divider systems with height separation (TS1), please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

Single-part end connectors – plastic (with integrated strain relief)

The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector.

Bi
[mm]
BEF
[mm]
nz
30
40 2
50
60 4
Connection point

F – fixed point
M – driver

Connection type

A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Order example

Order code

End connector

F

A

End connector

M

A

End connector

End connector

End connector

Connection point

F

M

Connection type

A

A