United States
Call: 800.323.7790 | |  

QT0320.030

Stay variant 030 – with outside opening crossbars

QT0320.030 Start
QT0320 030 Stay variants
Properties
  • Weight-optimised plastic frame with particularly high torsional rigidity.
  • Crossbar can be opened at any position on one side
  • Outside: openable.
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width
Bi 15 – 65 mm
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type.
Please contact us.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
Bi
[mm]
Bk
[mm]
qk
[kg/m]
20 25.5 15 25 38 50 65 Bi + 12 0.35 – 0.45
KR
[mm]
28384875100125

Order example

Order code

QT0320

030

50

100

1280

VS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

Inner distribution

Divider systems

The divider system is mounted on each crossbar as a standard – on every 2nd chain link for stay mounting (HS).
As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

Divider system TS0

without height separation
QT0320 TS0 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A486

The dividers can be moved in the cross section.

Divider system TS1

with continuous height separation
QT0320 TS1 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A4862

The dividers can be moved in the cross section.

Order example

Order code

TS1

A

3

VD0

VD1

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT].

If using divider systems with height separation (TS1), please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.

End connectors

Single-part end connectors – plastic (with integrated strain relief)

The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector.

QT0320 End connector
QT0320 End connector
QT0320 End connector
QT0320 End connector
Important information

The end connectors cannot be swivelled.

Bi
[mm]
BEF
[mm]
nz
15
27 2
25
37 3
38
50 4
50
62 5
65
77 6
QT0320 End connector

The end connectors are also available as an option without integrated strain relief. Please state when ordering.

QT0320 End connector
Connection point

F – fixed point
M – driver

Connection type

A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Order example

Order code

End connector

F

A

End connector

M

A

End connector

End connector

End connector

Connection point

F

M

Connection type

A

A

Subject to change.
^