0130
Type 0130 – with outside opening crossbars
Properties
- Weight optimised plastic frame with high torsional rigidity.
- Openable at any position.
- Outside: openable.
Stay arrangement on each chain link (VS: fully-stayed)
Pictographs
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Dimensions
The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Calculating the cable carrier length
hi
[mm]
|
hG
[mm]
|
Bi
[mm]
|
Bk
[mm]
|
qk
[kg/m]
| |||
|---|---|---|---|---|---|---|---|
| 10 | 12.5 | 6 | 10 | 15 | 20 | Bi + 6 | 0.097 – 0.178 |
KR
[mm]
| ||
|---|---|---|
| 20 | 28 | 37 |
Order example
MONO
0130
15
28
390
VS
End connectors
Single-part end connectors – plastic (with integrated strain relief)
The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector.
Depending on the design, the connection angles can be swivelled up to 12°.
F – fixed point
M – driver
A – threaded joint outside (standard)
I – threaded joint inside
Single-part end connectors – plastic
The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector.
Depending on the design, the connection angles can be swivelled up to 12°.
F – fixed point
M – driver
A – threaded joint outside (standard)
I – threaded joint inside
Order example
End connector
F
A
End connector
M
A
End connector
End connector
F
M
A
A
