UA1665.RMA
Stay variant RMA – Mounting frame stay
Properties
- Weight-optimized plastic frame with particularly high torsional rigidity.
- Plastic crossbars and aluminum profile bars with plastic mounting frame stays for guiding very large cable diameters.
- Outside/inside: threaded joint easy to release.
Stay arrangement on each chain link (VS: fully-stayed)
Pictographs
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Dimensions
The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Calculating the cable carrier length
hi
[mm]
|
hG
[mm]
|
Bi
[mm]
|
Bk
[mm]
|
BEF
[mm]
| |||
|---|---|---|---|---|---|---|---|
| 44 | 60 | 125 | 150 | 175 | 200 | Bi + 22 | Bi + 27 |
KR
[mm]
| ||||||
|---|---|---|---|---|---|---|
| 75 | 100 | 120 | 140 | 200 | 250 | 300 |
* indicated according to standard pitch
Order example
UA1665
RMA
150
140
2660
RVAO
End connectors
Universal end connectors UMB – plastic (standard)
The universal mounting brackets (UMB) are made from plastic and can be mounted from above, from below or on the face side.
Recommended tightening torque:
5 Nm for screws M5 - 8.8
Bi [mm] | nz |
|---|---|
50 | 2 x 3 |
75 | 2 x 5 |
100 | 2 x 7 |
125 | 2 x 9 |
150 | 2 x 11 |
175 | 2 x 13 |
The end connectors are optionally also available with strain relief comb or with C-rail Art. no. 3931 (1 on each side) for clamps. Please state when ordering.
F – fixed point
M – driver
U – universal mounting bracket
Order example
UMB
F
U
UMB
M
U
UMB
UMB
F
M
U
U
We recommend the use of strain reliefs at the driver and fixed point.
Single-part end connectors – plastic
The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector.
Recommended tightening torque: 15 Nm for screws M8 - 8.8
Bi [mm] | nz |
|---|---|
50 | 2 x 4 |
75 | 2 x 6 |
100 | 2 x 8 |
125 | 2 x 10 |
150 | 2 x 12 |
175 | 2 x 14 |
200 | 2 x 16 |
225 | 2 x 18 |
250 | 2 x 20 |
The end connectors are optionally also available without strain relief comb. Please state when ordering.
F – fixed point
M – driver
A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside
Order example
End connector
F
A
End connector
M
A
End connector
End connector
F
M
A
A
