P0400 GS
PROTUM OFFICE
This variant for office use is based on the PROTUM® cable carrier system.
Pitch
40 mm
40 mm
Inner height
21.5 mm
21.5 mm
Inner width
50 mm
50 mm
All pictographs
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Order code
Important information
Pictographs
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
With in inner width of 50 mm and cable installation on both sides, PROTUM OFFICE offers sufficient space for telecommunication, energy and data cables in modern offices. The linkless design can blend into the environment as a design element, e.g. with an elegant silver-grey optic.
Small, light cable carrier
- Long service life – no links and therefore no link wear
- Good ratio of usable space to outer dimensions
- Easy installation by pressing in the cables
- Easy to install and fill
- Suitable for retrofitting
- Clean, space-saving installation
- Can be filled on one or both sides
Easy and fast installation
- Connections for all smooth surfaces
- Standard connection for table frame, round and square outside the footwell
- Up to 4 installation options, depending on connection (magnets, screws, cable ties and adhesive tape)
- Floor connection for sturdy positioning and floor connection
- Complete separation of data and power cables
Stay variants
P0400 GS01 (one-sided)
Frame with lamellae in the outer radius
- Belt with clip-on side parts.
- One-sided: for pressing in.
P0400 GS02 (double-sided)
Frame with lamellae in the outer and inner radius
- Belt with clip-on side parts.
- Double-sided: for pressing in.
Subject to change.
Follow Us On:
U.S. Tsubaki Automotive LLC
Conveyor Operations