P0160
Pitch
16 mm
16 mm
Inner height
15 mm
15 mm
Inner widths
15 – 30 mm
15 – 30 mm
Bending radii
18 – 48 mm
18 – 48 mm
All pictographs
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Order code
Important information
Pictographs
Inner height
Outer height
Inner width
Outer width
Inner width (Bi) in x mm increments
Pitch
Bending radius
Long travel length
Travel length unsupported
Travel length gliding
High additional load
High travel acceleration
High travel velocity
Stay arrangement on every 2nd chain link
Stay arrangement on every chain link
Cannot be opened
Opens outward
Opens inward
Opens inward/outward
Covered cable carrier
Sliding dividers
Fixable dividers
Fixable dividers in x mm grid
Height separation possible
Height separation in 1 mm increments
Hole stay available
Guide channel required
Strain relief
Clean room suitable
Quiet running/low noise
Sold by the meter
Low weight
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
Resistant to hot chips
Flame-resistant V0 (UL94)
Flame-resistant V2 (UL94)
Stay variants
P0160.010
Frame with lamellae in the outer radius
- Belt with clip-on side parts.
- Outside: for pressing in.
Installation dimensions
Unsupported arrangement
KR [mm] |
H [mm] |
Hz [mm] |
LB [mm] |
UB [mm] |
|---|---|---|---|---|
18 | 76 | 91 | 89 | 54 |
28 | 96 | 111 | 120 | 64 |
38 | 116 | 131 | 152 | 74 |
48 | 136 | 151 | 183 | 84 |
Load diagram for unsupported length depending on the additional load.
Intrinsic cable carrier weight qk = 0.21 kg/m with Bi 30 mm. For other inner widths, the maximum additional load changes.
Speed
up to 25 m/s
up to 25 m/s
Acceleration
up to 200 m/s2
up to 200 m/s2
Travel length
up to 1.18 m
up to 1.18 m
Additional load
up to 0.26 kg/m
up to 0.26 kg/m
Subject to change.
Follow Us On:
U.S. Tsubaki Automotive LLC
Conveyor Operations