United States
Call: 800.323.7790 | |  

ET1455.040

Stay variant 040 – with lamellae in the outer radius

ET1455.040 Start
ET1455 040 Stay variants
Properties
  • Weight-optimised plastic frame with particularly high torsional rigidity.
  • Lamellae can be swivelled at any position on one side.
  • Inside: swivelling.
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width
Bi 25 – 78 mm
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.

Important information

Design 040 is not suitable for gliding arrangements.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
Bi
[mm]
Bk
[mm]
qk
[kg/m]
25 36 25 38 58 78 Bi + 16 0.65 – 0.80
KR
[mm]
526595125150180200

Order example

Order code

ET1455

040

78

150

1456

VS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

End connectors

Single-part end connectors – plastic

The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector.

ET1455 End connector
ET1455 End connector
Important information

Recommended tightening torque: 
6 Nm for screws M6 - 8.8

Bi
[mm]
nz
25
2 x 2
38
2 x 3
58
2 x 4
78
2 x 6
ET1455 End connector

The end connectors are optionally also available without strain relief comb. Please state when ordering.

ET1455 End connector
Connection point

F – fixed point
M – driver

Connection type

A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Order example

Order code

End connector

F

A

End connector

M

A

End connector

End connector

End connector

Connection point

F

M

Connection type

A

A

Subject to change.
^