United States
Call: 800.323.7790 | |  

ET0320.040

Stay variant 040 – with lamellae in the inner radius

ET0320.040 Start
ET0320 040 Stay variants
Properties
  • Weight-optimised plastic frame with particularly high torsional rigidity.
  • Lamellae can be swivelled at any position on one side
  • Inside: swivelling.
Stay arrangement on every chain link

Stay arrangement on each chain link (VS: fully-stayed)

Inner width
Bi 15 – 65 mm
All pictographs

Dimensions

Dimensions
Important information

The maximum cable diameter strongly depends on the bending radius and the desired cable type.
Please contact us.

Important information

Design 040 is not suitable for gliding arrangements.

Calculating the cable carrier length
Cable carrier length LK: LK ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
hi
[mm]
hG
[mm]
Bi
[mm]
Bk
[mm]
qk
[kg/m]
18 25.5 15 25 38 50 65 Bi + 12 0.35 – 0.45
KR
[mm]
28384875100125

Order example

Order code

ET0320

040

50

100

1280

VS

Our technical support can provide help for gliding arrangements: engineeringsupport@kabelschlepp.com

Inner distribution

Divider systems

The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (Version A).

Divider system TS0

without height separation
ET0320 TS0 EN
Vers.
aT min
[mm]
ax min
[mm]
ac min
[mm]
nT min
A486

The dividers can be moved in the cross section.

Order example

Order code

TS0

A

3

Please state the designation of the divider system (TS0), the version, and the number of dividers per cross section [nT]. You can add a sketch to your order.

End connectors

Single-part end connectors – plastic (with integrated strain relief)

The plastic end connectors can be connected from above or below. The connection type can be changed by altering the position of the end connector.

ET0320 Single-part end connectors – plastic (with integrated strain relief)
ET0320 Single-part end connectors – plastic (with integrated strain relief)
ET0320 Single-part end connectors – plastic (with integrated strain relief)
ET0320 Single-part end connectors – plastic (with integrated strain relief)
Bi
[mm]
BEF
[mm]
nz
15
27 2
25
37 3
38
50 4
50
62 5
65
77 6
ET0320 Single-part end connectors – plastic (with integrated strain relief)

The end connectors are also available as an option without integrated strain relief. Please state when ordering.

ET0320 Single-part end connectors – plastic (with integrated strain relief)
Connection point

F – fixed point    
M – driver

Connection type

A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Order example

Order code

End connector

F

A

End connector

M

A

End connector

End connector

End connector

Connection point

F

M

Connection type

A

A

Subject to change.
^