United States
Call: 800.323.7790 | |  

EasyTrax® series

Extremely fast cable laying thanks to easy cable insertion

EasyTrax series Overview
  1. Sturdy 2-component design: solid chain body, flexible film hinge
  2. Plastic chain links
  3. Extensive unsupported length
  4. Inside space is gentle on the cables – no interfering edges
  5. Very quiet through integrated noise damping
  6. Inside or outside openable
  7. Dividers for cable separation
  8. Single-part end connectors with integratable strain relief

Features

  • Very fast cable laying by simply pressing in the cables
  • Very high fill level through lateral swivelling of the lamella – lamellae do not swivel into the cable space
  • Each chain link consists of two different materials:
    – Hard chain body made of glass-fibre reinforced material
    – Lamellae with flexible film hinge made of special elastic plastic
  • Sturdy cable carrier design
  • High torsional rigidity
  • Extensive unsupported length
  • Very quiet through integrated noise damping
Long travel length
Opens outward
Opens inward
Sliding dividers
Quiet running/low noise
ESD material
Ex-protection-material
Heat-resistant
Cold-resistant
All pictographs
EasyTrax series Features 1

Fast and easy installation of cables

EasyTrax series Features 2

Very high fill level

EasyTrax series Features 3

High side stability

EasyTrax series Features 4

Divider systems for reliable cable separation

Cable carrier design

Solid plastic cable carriers: chain links and end connectors made of plastic

Each chain link consists of two different materials:

  • Hard cable carrier body made of glass fiber-reinforced material
  • Flexible lamellae made of elastic plastic
EasyTrax Carrier construction

The two-component technology

The two-component technology of the EasyTrax® combines two seemingly incompatible features: stability and flexibility.
Cable carriers need to be extremely sturdy, with extensive unsupported length. At the same time, cables need to be inserted easily for fast cable laying. The EasyTrax® meets these requirements thanks to its innovative design and material combination of a hard cable carrier body made from fiber glass reinforced material and lamellae made of elastic plastic.

EasyTrax series 2K-Technology EN

Comparison of dimensions

Manufacturerhi
[mm]
hG
[mm]
t
[mm]
Identical connection hole pattern
ET03201825.532 yes
Competitive product192530.5 yes

Comparison of bending moment

EasyTrax Compare Bending moment

Comparison of bending strength

EasyTrax Compare Bending stiffness

Load diagram

for unsupported length depending on additional load

EasyTrax Load diagram EN

Advantages over competitive product

  • 4 times bigger additional load compared to competitive product
  • Double unsupported length compared to competitive product
  • Faster cable laying at a higher utilization faktor
  • Low noise operation due to internal damping system
  • High side stability through locking in the stroke system
  • Dividers can be used for cable separation

Types

ET0115

ET0115

Inner height [hi]:
4.6 mm
Inner width [Bi]:
7 mm
Pitch [t]:
11.5 mm
Bending [KR]:
10 mm
more details
ET0320

ET0320

Inner height [hi]:
18 mm
Inner widths [Bi]:
15 – 65 mm
Pitch [t]:
32 mm
Bending [KR]:
28 – 125 mm
more details
ET1455

ET1455

Inner height [hi]:
25 mm
Inner widths [Bi]:
25 – 78 mm
Pitch [t]:
45.5 mm
Bending [KR]:
52 – 200 mm
more details
Subject to change.
^